Home > Gas Pressure Sintering Furnace >

Customizable Gas Pressure Sintering Furnace For Hard Metals Cermets PM Materials

Product Categories

Sinter HIP Furnace [141]
Gas Pressure Sintering Furnace [61]
Vacuum Sintering Furnace [75]
MIM Sintering Furnace [49]
Metal Sintering Furnace [40]
Industrial Vacuum Furnace [39]
High Temperature Vacuum Furnace [28]
Vacuum Heat Treatment Furnace [35]
Ceramic Sintering Furnace [25]
High Vacuum Furnace [21]
Sintering Furnace Accessories [5]
Silicon Carbide Furnace [21]
CVD Coating Machine [33]

Zhuzhou Ruideer Metallurgy Equipment Manufacturing Co.,Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Customizable Gas Pressure Sintering Furnace For Hard Metals Cermets PM Materials

Name: Customizable Gas Pressure Sintering Furnace For Hard Metals Cermets PM Materials
Brand: Ruideer
Price: 93 USD

Brand Name : Ruideer

Model Number : 100 bar/60bar/10bar

Certification : CE certificate, GB150, JB4732

Place of Origin : China

MOQ : 1 set

Price : USD 93,000-77,000,000

Payment Terms : L/C, T/T

Supply Ability : 7 sets / month

Delivery Time : 5-8 months

Packaging Details : Special wooden box

Color : white, gray, black, blue

Power rating : 120KVA, 150KVA, 480KVA

Furnace shell : carbon steel

Heating element : graphite, carbon felt

Dewaxing : Hydrogen/Vacuum

Furnace vessel : SS304/Carbon steel

Contact Now

Gas Pressure Sintering Furnace For Hard Metals/Cermets/PM Materials With Customizable Sintering Space

The horizontal design makes it easy to load & unload, as well as easy maintenance. The entire process is of automatic control with safety interlock. Full load continuous operation is realized with its maximum ability of 300 furnace times/year or 300 working days/year. Adopting graphite element resistance heating (low voltage, high current) with multiple heating units, each unit of temperature is individually controlled ; The whole process is controlled by computer automation, monitoring, tracking, fault self-diagnosis simulation display and record. The process is controlled by PLC and industrial control machine (IPC) to realize the one-key start-up of the whole process, real-time dynamic monitoring, temperature, pressure, vacuum and other parameters saving and reliable alarm interlock..

Process Step
1. Vacuum Dewaxing
2. H₂-Dewaxing
3. Heating Vacuum (with/without pressure control)
4. Heating Partial Pressure Ar
5. TORVAC
6. Heating High Pressure Gas
7. Cooling High Pressure Gas

After sinterinng in RDE'S furnace, density, strength, durability and hardness of hard metals would improve a lot, meeting highest demands.

Sintering space	80-450L
Working temperature	1600℃(maximum working temperature)
Working temperature	1550℃(actual working temperature )
Pumping speed	The vacuum degree can reach 5Pa within 30min after the pump is started, and the limit vacuum value can reach 1Pa after pumping for 30min after reaching 5Pa (After drying the furnace, under the empty furnace, clean and cold state.)
Leakage rate	≤3Pa/h (Measuring the limit vacuum after drying the furnace, stop the operation of the pump group and start the test. Average within 3 hours in empty furnace, clean and cold state)
Cooling speed	Empty furnace. The cooling time of cooling temperature from 800℃ down to 100℃ just cost less or equal 3 hours.(water temperature≤28℃, 2bar≤water pressure≤3bar)
Cooling speed	The inner furnace is equipped with rapid cooling fan and cooling water realize rapid cooling.
Heating rod material	Graphite
Temperature control mode	Three zone temperature control independently
Heating up speed	Empty furnace heating up≤5℃
Heating power	It is about 120-480KVA
UPS guarantee time	It can power the indicator lights and control the furnace when the power goes out,the time is more than or equal 80 minutes.

Product Tags: